Cancrete CESA50 Cattle Waterer

Cancrete CESA50 Cattle Waterer
Product Code: CESA50
Availability: In Stock
Price: $589.00
   - OR -   

Shipping to Lower 48 States included in price.


Cancrete Waterer 18" high CESA50

18" high CESA50
Indestructible for Equine and Elk

You need the best in concrete technology

To make a concrete waterer that will last through years of use, you need the best in concrete technology matched with the best of components.

Cancrete 18" high CESA50 Specifications & Product Notes

Model CESA50
No. of Animals 0-50
Dimensions 22"L x 24 7/8"W x 18"H
Primary Element 300W
Auxiliary Element 1x98W
Weight 380lbs
Capacity 5 gal.


  • Cancrete bowls can be set up with Electrics, Continuous Flow, the ICE SWEEPER(tm) or Concrete Insulated Bowl only.
  • Shipping weights are approximate.
  • Dimensions are taken from measurements of the base of the hull, height is to top of drinking lip on bowl.
  • All standard models are 110v.
  • Standard valve assembly is 3/4” Valve W/6” Stainless Ball. Model C450 + larger uses a 1” valve. Hawkeye plastic valves and plastic floats are available on request.
  • The reason for two sets of specifications on "number of head" is Cows drink in groups therefore more open bowl space is require to reduce fighting and possible injury.
  • Water bowls are a mechanical item that requires some adjusting & tweaking as all water, water pressure and water quality is not the same in every area
  • If your bowl freezes below ground level it has nothing to do with the bowl. Contact us and we will tell you how to fix it.
  • Warranty does not apply to bowls hit with a front end loader or "any" other damage done to the hull
  • Warranty void if a proper lifter or lifters are not uses to place bowl

Air entrained concrete and superior attention to quality control throughout the entire precast process is the key to Cancrete durability. Air entraining produces microscopic air pockets that allow any moisture in the concrete to expand and contract in these pockets, not in the concrete itself. The result is a super strong hull that can weather the freeze / thaw cycle without cracking. It’s no big secret, just a lot of hard work and attention to the details.

  • Heavy gauge Stainless Steel is used on the valve cover, service door, ball float and all hardware.
  • Easy access through the large service door.
  • Precast hulls are made from steel reinforce, 6000 PSI, air entrained, sulphate resistant concrete.
  • A model for any size pen of cattle, horses or bison.
  • Deep trough bowls are easy to clean and have 2 funnel drains in C250 and up.
  • No sharp corners.
  • Bowls are epoxy coated providing chemical protection from sodium, manure, acid and silage.

Cancrete EasyPad

Pouring a pad is a hassle. Make your next livestock water bowl a snap!

Advantages of An EasyPad
  • Eliminates concerns with last minute installation (i.e. ground frozen, etc.) "Perfect when winter catches you off guard!"
  • Eliminates having to pay extra charge for short load of concrete
  • Eliminates the concerns of having the ground fall away due to settling the next year and potentially undermining
    the pad, leaving a hollow spot. With EasyPad simply pick up the bowl, the pad, fix and pack the ground
    and you are good to go.
  • Eliminates having to buy forming materials, steel and, of course, the labor to make a pad when the summer
    is short already.

Design and Construction Features

  • Poured in place inserts and bottom stand offs so that pad can be picked up with a front end loader,
    pallet forks or even bale forks if spacing is correct and they are strong enough.
  • Built to a standard to withstand Cancrete's heaviest bowl and livestock weight using the same dry poLJr
    8000 PSI concrete as Cancrete's bowls.
  • Fully designed with steel reinforcement to withstand freeze thaw cycles.
  • Corners eliminated as cattle break them off anyway.
  • Rough surface and 14" diameter hole in center to allow for any size riser pipe.


Powered By OpenCart © 2018